|
|
Plastimo Marine Equipment Offshore+ Liferaft
(Product ID: 1339)
QuickSpecs
Base Price:
The Offshore+ is designed for bluewater longdistance
cruising and racing, and is constructed with
essential features such as two stacked tubes and a
self-erecting canopy, the largest ballast pockets in the
Plastimo range (10.9 gal/42 liters) and an insulating
foam-coated fabric double floor for hypothermia
protection.
|
|
|
|
|
|
|
Plastimo Marine Equipment Bumper Dock Fender
(Product ID: 1343)
QuickSpecs
Base Price:
Save yourself some anxious moments approaching the dock - especially if you're a singlehander - and prevent damage to your boat when wind and current are working against you. The Bumper Dock Fender, installed on pontoons or docks, is a highly efficient fender that protects your boat's bow and topsides from damage cause by contact with the dock.
|
|
Plastimo Marine Equipment Bosun's Chair-Plastimo Comfort
(Product ID: 9606)
QuickSpecs
Base Price:
Plastimo Marine Equipment Bosun's Chair-Plastimo Comfort
No more tiring positions, no need to work at arms length : you can now work aloft comfortably and safely, in perfect balance.
The back strap and crotch piece will not only prevent you from falling out of the chair, but are so designed that the angle of the chair can be adjusted, allowing each individual to find the most comfortable working balance
between back and legs.
Equipped with 2 pockets : one is composed of two compartments and an elasticated band to store smaller tools ; the other pocket is very large, designed to carry larger tools, such as a drill, a hammer, a hacksaw, etc. This large pocket can also be used to "shuttle" equipment up and down, and as a storage pocket for the bosun's chair.
|
|
Plastimo Marine Equipment Bosun's Chair-Professional
(Product ID: 9607)
QuickSpecs
Base Price:
Plastimo Marine Equipment Bosun's Chair-Professional
Design is identical to "Comfort" model, but with reinforced seams, heavy duty webbing and canvas, and a larger seat.
The wrap-around design provides added comfort and safety, ideal for an extended time aloft.
The chair folds flat in a pouch which converts into a large tool pocket when the chair is in use. An elasticated band also helps storing smaller tools.
|
Plastimo Marine Equipment Single Joystick Control Panel
(Product ID: 9801)
QuickSpecs
Base Price:
Plastimo Marine Equipment Single Joystick Control Panel
Available in black or grey, these control panels are specially designed for use with Max Power’s range of Electric Tunnel Thrusters.
Fitted using a simple whole saw cut out, panels are easy to fit and benefit from a simple and easily replaceable weatherproof clip-on cover.
Each panel is complete with both male and female connectors using a reusable connection system.
|
|
|
|
Plastimo Marine Equipment Immersed Stainless Steel Platform Ladder
(Product ID: 9643)
QuickSpecs
Base Price:
Plastimo Marine Equipment Immersed Stainless Steel Platform Ladder
Specially designed for all types of inflatable boats from 3 to 6 metres, either RIBs or boats with full floor boards. Consists in an immersed mini-platform, on which one can kneel and dispose of heavy or clumsy equipment (diving bottle, fins, gun...).
The scubadiver can then easily climb on board. Also ideal to return on board after swimming.
|
|
|
|
Plastimo Marine Equipment Rescue Buoy with Yellow Cover
(Product ID: 9332)
QuickSpecs
Base Price:
Plastimo Marine Equipment Rescue Buoy with Yellow Cover
A new concept in the array of man overboard recovery aids : simple and ingenious*, the Plastimo Rescue Buoy represents a major-though simple- breakthrough which will contribute to saving lives at sea.
|
|
|
|
Plastimo Marine Equipment 20m Rescue Line
(Product ID: 9410)
QuickSpecs
Base Price:
Plastimo Marine Equipment 20m Rescue Line
Throw bag heaving line, very simple to operate : a 20 m retrieval line stowed in a bag, allowing to connect the survivor to the boat.
Equally useful in many circumstances, such as getting a line to a dock, and also in many river leisure activities, such as canoeing, rafting, etc.
The Rescue Line is weighted, so that it can be thrown with accuracy at a reasonable distance, even against strong winds.
It features a grab loop at both ends, enabling both the rescuer and the survivor to remain attached to the line.
|
|
Plastimo Marine Equipment Flushmount Safety Ladder
(Product ID: 9424)
QuickSpecs
Base Price:
Plastimo Marine Equipment Flushmount Safety Ladder
Helps any crewmember get back on board easily without external help.
Suitable for current use (bathing) or in case of Man Over Board.
Consists of 3 polypropylene steps and 1 st. steel handle assembled by a highly resistant line, (bright yellow Ø 3 mm polyester). Ladder is stored in a polyamide tube with a grey polypropylene cap, for optimum protection and waterproofness.
|
|
|
|
|
|
|
|
|
|
Plastimo Marine Equipment Rescue Buoy Conversion Kit
(Product ID: 9434)
QuickSpecs
Base Price:
Plastimo Marine Equipment Rescue Buoy Conversion Kit
A new concept in the array of man overboard recovery aids : simple and ingenious,
the Plastimo Rescue Buoy represents a major -though simple- breakthrough which will
contribute to saving lives at sea.
|
Plastimo Marine Equipment Rescue Buoy Cover
(Product ID: 9436)
QuickSpecs
Base Price:
Plastimo Marine Equipment Rescue Buoy Cover
A new concept in the array of man overboard recovery aids : simple and ingenious,
the Plastimo Rescue Buoy represents a major -though simple- breakthrough which will
contribute to saving lives at sea.
|
Plastimo Marine Equipment Rescue Buoy with White Cover
(Product ID: 9461)
QuickSpecs
Base Price:
Plastimo Marine Equipment Rescue Buoy with White Cover
A new concept in the array of man overboard recovery aids : simple and ingenious*, the Plastimo Rescue Buoy represents a major-though simple- breakthrough which will contribute to saving lives at sea.
|
|
|
Plastimo Marine Equipment Safety light
(Product ID: 9463)
QuickSpecs
Base Price:
Plastimo Marine Equipment Safety light
Applicable to a number of uses and sports : boating, diving, transport…
Operated by simply rotating the ring around the lens.
Intense colour output : visible up to 5 km in the dark.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastimo Marine Equipment Hand Pump with 3.3' Hose
(Product ID: 9597)
QuickSpecs
Base Price:
Plastimo Marine Equipment Hand Pump with 3.3' Hose
Corrosion, electrolysis and fuel resistant bilge pumps.
Of rugged construction, they produce high capacity output with the convenience of many mounting positions (see drawings).
• Self-priming and leak free.
• Quick release inspection cover for added safety.
The double action pump is equipped with outlet elbows, swivelling on 220°, thus allowing all mounting positions and reducing the clearance required (290 mm to 400 mm maximum).
The outlet elbows are screwed and fitted with an O-ring for perfect watertightness and added safety (quick release facility).
Straight outlets 17491 and elbows 17492 can also be mounted on pump C, which alllows pumping in two different locations on the boat, while having only one waste water outlet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastimo Marine Equipment Youth Bolero Harness
(Product ID: 9610)
QuickSpecs
Base Price:
Plastimo Marine Equipment Youth Bolero Harness
Particularly recommended for children, the Bolero vest with built-in harness is definitely the simplest to use.
It is equipped with a permanently integrated tether, to prevent the child from releasing it himself. It also features a chest pouch to store the tether when not in use.
|
Plastimo Marine Equipment Bolero Harness
(Product ID: 9611)
QuickSpecs
Base Price:
Plastimo Marine Equipment Bolero Harness
The simplest to use : Bolero vest with built-in harness.
Particularly recommended for a regular use and specifically for children.
|
|
Plastimo Marine Equipment Adjustable Harness-Back Shoulder Strap Support,Child
(Product ID: 9614)
QuickSpecs
Base Price:
Plastimo Marine Equipment Adjustable Harness-Back Shoulder Strap Support
Fully adjustable, at waistband and shoulderstraps.
Child size and adult size (see previous page) are clearly identified by different colours.
A back patch holds the shoulder straps in the correct position ; it also contributes to comfort and makes donning easier.
|
|
Plastimo Marine Equipment Single Tether
(Product ID: 9616)
QuickSpecs
Base Price:
Plastimo Marine Equipment Single Tether
All Plastimo harnesses come with or without a tether, to allow all combinations (except for Bolero, child size : tether is integrated to harness).
All our tethers are equipped with safety hooks to prevent accidental opening.
|
Plastimo Marine Equipment Elastic Single Tether
(Product ID: 9617)
QuickSpecs
Base Price:
Plastimo Marine Equipment Elastic Single Tether
All Plastimo harnesses come with or without a tether, to allow all combinations (except for Bolero, child size : tether is integrated to harness).
All our tethers are equipped with safety hooks to prevent accidental opening.
|
|
|
|
|
|
Plastimo Marine Equipment One-Step Stainless Steel Ladder
(Product ID: 9622)
QuickSpecs
Base Price:
Plastimo Marine Equipment One-Step Stainless Steel Ladder
Unique step-adjusting concept, designed by our Research & Developement department.
This exclusive assembly process allows to keep the steps horizontal, whatever the shape and inclination of the free-board, transom or skirt.
You simply adjust yourself the inclination of the steps with an allen key, which unables you to convert a "series" ladder into a "customised" ladder.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastimo Marine Equipment Manual Inflation Pump
(Product ID: 9644)
QuickSpecs
Base Price:
Plastimo Marine Equipment Manual Inflation Pump
Stirrup type pump which will take the backache out of inflating fenders.
Constructed totally of plastic materials for rust free, low maintenance, this pump comes complete with hose and nozzle fittings.
|
Plastimo Marine Equipment SuperTurbo Electric Inflator
(Product ID: 9645)
QuickSpecs
Base Price:
Plastimo Marine Equipment SuperTurbo Electric Inflator
Ideal to inflate large units. Integrated pressure control.
Output 450L/min. Operates on 12-volt battery. Power consumption 10 amps/h. Supplied complete with nozzle fittings and clips to connect to battery.
The model supplied with battery offers a 15-minute battery lifetime when fully charged. Supplied with cigarette-lighter charger.
|
Plastimo Marine Equipment Electic Inflation
(Product ID: 9646)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electic Inflation
Automatic electric compressor, to inflate pneumatic boats and fenders. Pressure control maximum 300 mBar. Output 200 L/min. Operates on 12 Volt battery. Power consumption 9 Amps.
Supplied complete with nozzlefittings and clips to connect to battery.
|
|
|
|
Plastimo Marine Equipment 5L Heavy-Duty Foot Pump
(Product ID: 9649)
QuickSpecs
Base Price:
Plastimo Marine Equipment 5L Heavy-Duty Foot Pump
Heavy duty foot pump particularly suitable for synthetic or rubber coated boats.
• Glassfibre polyamide plates.
• Reinforced coated bellows.
• all metal parts stainless steel.
• Reinforced hose.
• Universal adaptor.
|
Plastimo Marine Equipment 6.5L Heavy-Duty Foot Pump
(Product ID: 9650)
QuickSpecs
Base Price:
Plastimo Marine Equipment 6.5L Heavy-Duty Foot Pump
Heavy duty foot pump particularly suitable for synthetic or rubber coated boats.
• Glassfibre polyamide plates.
• Reinforced coated bellows.
• all metal parts stainless steel.
• Reinforced hose.
• Universal adaptor.
|
|
|
|
|
|
Plastimo Marine Equipment Training Buoy
(Product ID: 9656)
QuickSpecs
Base Price:
Plastimo Marine Equipment Training Buoy
Developed in cooperation with the French Tornado Olympic Team, this buoy is specifically designed for the training of top regatta racers, speed challenges and sailing school training sessions.
It can be used either as a drifting buoy, or as a traditional regatta buoy, with the additional advantage of small dimensions and ease of use.
|
Plastimo Marine Equipment Jumbo Regatta Buoy
(Product ID: 9657)
QuickSpecs
Base Price:
Plastimo Marine Equipment Jumbo Regatta Buoy
Aimed at large yachts, the 3.20 m high Jumbo mark buoy can be easily spotted even from a distance. Its PVC 1100 Decitex construction makes it very resistant to handling and to potential collisions with boats. Can be ballasted according to sea and wind conditions, thanks to 3 reinforced attachment D-rings at the base of the buoy.
|
Plastimo Marine Equipment XM Horizon Jacket
(Product ID: 9662)
QuickSpecs
Base Price:
Plastimo Marine Equipment XM Horizon Jacket
Lightweight foul weather gear, made of yellow colour polyester with PVC coating. Absolute watertightness is ensured by high frequency welded seams.
|
Plastimo Marine Equipment XM Horizon Bib
(Product ID: 9664)
QuickSpecs
Base Price:
Plastimo Marine Equipment XM Horizon Bib
Lightweight foul weather gear, made of yellow colour polyester with PVC coating. Absolute watertightness is ensured by high frequency welded seams.
|
|
|
|
Plastimo Marine Equipment Latex Gloves
(Product ID: 9667)
QuickSpecs
Base Price:
Plastimo Marine Equipment Latex Gloves
Top and fingers in seamless cotton/polyester knit. Excellent grip. Slip-proof latex coated palm and fingers. High abrasion, tear and puncture resistance.
|
|
|
|
|
|
|
|
|
|
|
|
Plastimo Marine Equipment Flat Spreader Boot
(Product ID: 9675)
QuickSpecs
Base Price:
Plastimo Marine Equipment Flat Spreader Boot
Protect your sails from chafing at cross trees and help foot of genoa over stanchions when sheeting in.
Easy fitting, even after the mast has been stepped.
|
Plastimo Marine Equipment Round Spreader Boot
(Product ID: 9676)
QuickSpecs
Base Price:
Plastimo Marine Equipment Round Spreader Boot
Protect your sails from chafing at cross trees and help foot of genoa over stanchions when sheeting in.
Easy fitting, even after the mast has been stepped.
|
|
Plastimo Marine Equipment Wind Scoop
(Product ID: 9680)
QuickSpecs
Base Price:
Plastimo Marine Equipment Wind Scoop
The Plastimo wind scoops are trimmed with a reinforced band over the seams, for increased durability and optimum strain resistance.
They can thus be kept fairly taut and can cope with strong winds.
|
Plastimo Marine Equipment Pressure Water Outlet
(Product ID: 9682)
QuickSpecs
Base Price:
Plastimo Marine Equipment Pressure Water Outlet
Used in conjunction with a pump and a thru-hull fitting, the Plastimo sea water outlet produces pressure sea water on the deck (to wash the deck or rinse the fish).
Also perfectly suitable with fresh water.
|
Plastimo Marine Equipment Pressure Water Inlet
(Product ID: 9688)
QuickSpecs
Base Price:
Plastimo Marine Equipment Pressure Water Inlet
The Plastimo fresh water inlet is the perfect connection between the boat's water network and the shore water supply. It is then easy to cook or have a shower when at the dock, without using water from the tanks. (Not suitable for filling the water tanks).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastimo Marine Equipment Compact Retract 70
(Product ID: 9734)
QuickSpecs
Base Price:
Plastimo Marine Equipment Compact Retract 70
Designed to suit the latest generation of high performance yachts, the Compact Retract is fitted, as optional original equipment, to a wide range of new sailboats from 35’ to 50’ and is available in 12V (Compact Retract 70) and 24V (Compact Retract 80).
When closed this retractable thruster has no negative effect on the yacht’s performance, even in light winds where tunnel thrusters can greatly reduce sailing performance.
Manufactured using lightweight composites, the Compact Retract is the most silent unit available today and is easily fitted to most yachts with a master cabin up against the forward bulkhead.
Its low profile and simple installation make this cost effective unit by far the most popular retractable thruster unit on the market today.
|
Plastimo Marine Equipment Compact Retract 80
(Product ID: 9735)
QuickSpecs
Base Price:
Plastimo Marine Equipment Compact Retract 80
Designed to suit the latest generation of high performance yachts, the Compact Retract is fitted, as optional original equipment, to a wide range of new sailboats from 35’ to 50’ and is available in 12V (Compact Retract 70) and 24V (Compact Retract 80).
When closed this retractable thruster has no negative effect on the yacht’s performance, even in light winds where tunnel thrusters can greatly reduce sailing performance.
Manufactured using lightweight composites, the Compact Retract is the most silent unit available today and is easily fitted to most yachts with a master cabin up against the forward bulkhead.
Its low profile and simple installation make this cost effective unit by far the most popular retractable thruster unit on the market today.
|
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 125
(Product ID: 9736)
QuickSpecs
Base Price:
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 125
The CT HYD 125 is designed for motor yachts and deep footed sailing yachts ranging from 35’-57’.
The smallest in the hydraulic tunnel thruster range, the twin propeller CT HYD 125 is fabricated using composite materials, has a 185mm diameter tunnel, a thrust rating of up to 125/275 (kg/lbs) and integrates all the unique features of the range.
|
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 225
(Product ID: 9737)
QuickSpecs
Base Price:
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 225
The CT HYD 225 is designed for motor yachts and deep footed sailing yachts ranging from 45’-70’.
Manufactured using composite materials, this twin propeller model has a 185mm diameter tunnel, a thrust rating of up to 225/495 (kg/lbs) and integrates all the unique features of the hydraulic tunnel thruster range.
|
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 325/250
(Product ID: 9738)
QuickSpecs
Base Price:
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 325/250
The CT HYD 325/250 is designed for motor yachts and deep footed sailing yachts ranging from 52’-90’.
The largest in the hydraulic tunnel thruster range, this twin propeller model has a 185mm diameter tunnel and is available in bronze only. Two different power options offer a thrust rating of up to 250/550 (kg/lbs) or 325/715(kg/lbs).
|
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 325/325
(Product ID: 9739)
QuickSpecs
Base Price:
Plastimo Marine Equipment Hydraulic Tunnel Thruster-CT HYD 325/325
The CT HYD 325/325 is designed for motor yachts and deep footed sailing yachts ranging from 52’-90’.
The largest in the hydraulic tunnel thruster range, this twin propeller model has a 185mm diameter tunnel and is available in bronze only. Two different power options offer a thrust rating of up to 250/550 (kg/lbs) or 325/715(kg/lbs).
|
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT35-IP
(Product ID: 9740)
QuickSpecs
Base Price:
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT35-IP
The smallest in the Max Power Ignition Protected tunnel thruster range, the CT35-IP is ideally suited to motor yachts and deep footed sailing yachts ranging from 17’-34'.
Manufactured using composite materials, the CT35-IP is a single propeller thruster with a 125mm diameter tunnel and thrust rating of up to 35/75 (kg/lbs).
Like all Max Power Ignition Protected tunnel thrusters, the CT35-IP is easy to install, maintenance free, and integrates all the unique features common to this range.
|
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT45-IP
(Product ID: 9741)
QuickSpecs
Base Price:
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT45-IP
The CT45-IP is ideal for motor yachts and deep footed sailing yachts ranging from 19’-36'.
Manufactured using composite materials, the CT45-IP has a 125mm diameter tunnel. As small and compact as the CT35-IP, the CT45-IP benefits from an increased thrust rating of up to 40/88 (kg/lbs) thanks to its twin propellers.
Easy to install and maintenance free, this model integrates all the unique features common to Max Power’s Ignition Protected tunnel thrusters.
|
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT60-IP
(Product ID: 9742)
QuickSpecs
Base Price:
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT60-IP
Available in 12V or 24V, the CT60-IP is suited to motor yachts and deep footed sailing yachts between 20’-40'.
Manufactured using composite materials, the CT60-IP is a single propeller thruster with a 185mm diameter tunnel and thrust rating of up to 60/132 (kg/lbs) on the 12V model, or 60/143 (kg/lbs) on the 24V model.
Integrating the unique features common to the Max Power Ignition Protected tunnel thruster range, the CT60-IP is easy to install and connect.
|
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT80-IP
(Product ID: 9743)
QuickSpecs
Base Price:
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT80-IP
Available in 12V or 24V, the CT80-IP is perfectly suited to motor yachts and deep footed sailing yachts in the popular 25’-44’ size range.
With its 185mm tunnel diameter and thrust rating of up to 65/143 (kg/lbs) on the 12V model, or 80/176 (kg/lbs) on the 24V model, this powerful yet economic thruster integrates all the unique features common to the range.
|
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT100-IP
(Product ID: 9744)
QuickSpecs
Base Price:
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT100-IP
The 12V, twin propeller CT100-IP suits a wide range of motor yachts and deep footed sailing yachts ranging from 30’-53’.
This composite Ignition Protected thruster has a tunnel diameter of 185mm and a thrust rating of up to 90/198 (kg/lbs).
The CT100-IP, like all Max Power Ignition Protected tunnel thrusters, is maintenance free, benefits from a long lifespan and integrates all the unique features of this range.
|
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT125-IP
(Product ID: 9745)
QuickSpecs
Base Price:
Plastimo Marine Equipment Ignition Protected Tunnel Thruster-CT125-IP
The 24V CT125-IP is the largest Ignition Protected tunnel thruster in the Max Power range with a 185mm diameter tunnel and a thrust rating of 117/257 (kg/lbs).
This high performance thruster is suitable for motor yachts and deep footed sailing yachts ranging from 35’-58’.
Offering all the unique features of the Max Power Ignition Protected tunnel thruster range, this model is ideal where extra thrust power is required.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT35
(Product ID: 9791)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT35
The smallest in the Max Power electric tunnel thruster range, the CT35 is ideally suited to motor yachts and deep footed sailing yachts ranging from 17’-34'.
Manufactured using composite materials, the CT35 is a single propeller thruster with a 125mm diameter tunnel and thrust rating of up to 35/75 (kg/lbs).
Like all Max Power electric tunnel thrusters, the CT35 is easy to install, maintenance free, and integrates all the unique features common to this range.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT45
(Product ID: 9793)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT45
The CT45 is ideal for motor yachts and deep footed sailing yachts ranging from 19’-36'.
Manufactured using composite materials, the CT45 has a 125mm diameter tunnel. As small and compact as the CT35, the CT45 benefits from an increased thrust rating of up to 40/88 (kg/lbs) thanks to its twin propellers.
Easy to install and maintenance free, this model integrates all the unique features common to Max Power’s electric tunnel thrusters.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT60
(Product ID: 9794)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT60
Available in 12V or 24V, the CT60 is suited to motor yachts and deep footed sailing yachts between 20’-40'.
Manufactured using composite materials, the CT60 is a single propeller thruster with a 185mm diameter tunnel and thrust rating of up to 60/132 (kg/lbs) on the 12V model, or 60/143 (kg/lbs) on the 24V model.
Integrating the unique features common to the Max Power electric tunnel thrusters range, the CT60 is fitted as standard on a large variety of yachts.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT80
(Product ID: 9795)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT80
This composite, twin propeller, DC tunnel thruster is undeniably the best selling model in the Max Power electric tunnel thruster range.
Available in 12V or 24V, the CT80 is perfectly suited to motor yachts and deep footed sailing yachts in the popular 25’-44’ size range.
With its 185mm tunnel diameter and thrust rating of up to 65/143 (kg/lbs) on the 12V model, or 80/176 (kg/lbs) on the 24V model, this powerful yet economic thruster integrates all the unique features common to the range and is fitted as standard on a large variety of yachts.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT100
(Product ID: 9796)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT100
The 12V, twin propeller CT100 suits a wide range of motor yachts and deep footed sailing yachts ranging from 30’-53’.
This composite thruster has a tunnel diameter of 185mm and a thrust rating of up to 90/198 (kg/lbs).
The CT100, like all Max Power electric tunnel thrusters, is maintenance free, benefits from a long lifespan and integrates all the unique features of this range.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT125
(Product ID: 9797)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT125
The 24V CT125 is the most powerful 185mm diameter tunnel thruster on the market with a thrust rating of 117/257 (kg/lbs).
This high performance thruster is suitable for motor yachts and deep footed sailing yachts ranging from 35’-58’.
Offering all the unique features of the Max Power electric tunnel thrusters range this model is ideal where extra thrust power is required.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT165
(Product ID: 9798)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT165
The 24V CT165 is ideally suited to motor yachts and deep footed sailing yachts ranging from 40’-62’.
Manufactured using composite materials, this model has twin propellers, a 250mm diameter tunnel and a thrust rating of up to 160/352 (kg/lbs).
This model integrates all the unique features of the Max Power electric tunnel thrusters range, ensuring a long and maintenance free lifespan.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT225
(Product ID: 9799)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT225
The CT225 is the most powerful 250mm diameter electric tunnel thruster on the market, with a thrust rating of up to 200/440 (kg/lbs), and is also the largest composite thruster in the Max Power electric tunnel thruster range.
Suitable for motor yachts and deep footed sailing yachts ranging from 44’-68’ this model is fitted as standard on large variety of yachts.
Offering all the unique features of the range this twin propeller model is ideal where extra thrust power is required.
|
Plastimo Marine Equipment Electric Tunnel Thruster-CT325
(Product ID: 9800)
QuickSpecs
Base Price:
Plastimo Marine Equipment Electric Tunnel Thruster-CT325
The largest and most powerful in the Max Power electric tunnel thruster range, the CT325 is suitable for motor yachts and deep footed sailing yachts from 52’ up to 90’.
This high-performing 24V DC tunnel thruster, available in bronze only, completes the Max Power electric tunnel thruster range offering larger sized yachts a tunnel thruster solution.
|
Plastimo Marine Equipment Double Joystick Control Panel
(Product ID: 9802)
QuickSpecs
Base Price:
Plastimo Marine Equipment Double Joystick Control Panel
Available in black or grey, these control panels are specially designed for use with Max Power’s range of Electric Tunnel Thrusters.
Fitted using a simple whole saw cut out, panels are easy to fit and benefit from a simple and easily replaceable weatherproof clip-on cover.
Each panel is complete with both male and female connectors using a reusable connection system.
|
Plastimo Marine Equipment Touch Button Control Panel
(Product ID: 9803)
QuickSpecs
Base Price:
Plastimo Marine Equipment Touch Button Control Panel
Available in black or grey, these control panels are specially designed for use with Max Power’s range of Electric Tunnel Thrusters.
Fitted using a simple whole saw cut out, panels are easy to fit and benefit from a simple and easily replaceable weatherproof clip-on cover.
Each panel is complete with both male and female connectors using a reusable connection system.
|
Plastimo Marine Equipment VIP Series 150
(Product ID: 9804)
QuickSpecs
Base Price:
Plastimo Marine Equipment VIP Series 150
The largest electric thruster in the Max Power range, the VIP 150 electric is a vertically retracting DC thruster.
Available in two thrust ratings: 12V & 24V, the VIP 150 Electric is particularly well suited to boats from 45’ to 60’.
High performance & excellent reliability have made this unit an industry standard for nearly 10 years.
Recently upgraded the VIP 150 Electric offers a new control system and all the safety features common to Max Power bow and stern thrusters.
|
Plastimo Marine Equipment Hydraulic Thrusters VIP 150
(Product ID: 9805)
QuickSpecs
Base Price:
Plastimo Marine Equipment Hydraulic Thrusters VIP 150
Built for the growing 55-75’ compact super yacht sector:
the hydraulic VIP 150 HYD & VIP 250 HYD both benefit from an ingenious design, allowing a light, powerful retractable thruster to be built to a competitive price.
|
Plastimo Marine Equipment Hydraulic Thrusters VIP 250
(Product ID: 9806)
QuickSpecs
Base Price:
Plastimo Marine Equipment Hydraulic Thrusters VIP 250
Built for the growing 55-75’ compact super yacht sector:
the hydraulic VIP 150 HYD & VIP 250 HYD both benefit from an ingenious design, allowing a light, powerful retractable thruster to be built to a competitive price.
|
Plastimo Marine Equipment VIP 150 Mounting Flange
(Product ID: 9807)
QuickSpecs
Base Price:
Plastimo Marine Equipment VIP 150 Mounting Flange
Mounting bases to suit all of our retractable thrusters are available to facilitate installation. Manufactured from isophtalic GRP, they can be easliy integrated into new build GRP yachts or retro-fitted.
Aluminium yachts are catered for with suitable aluminium flanges. These are designed to be welded to the top of a mounting base constructed in the hull.
|
Plastimo Marine Equipment VIP 250 Mounting Flange
(Product ID: 9808)
QuickSpecs
Base Price:
Plastimo Marine Equipment VIP 250 Mounting Flange
Mounting bases to suit all of our retractable thrusters are available to facilitate installation. Manufactured from isophtalic GRP, they can be easily integrated into new build GRP yachts or retro-fitted.
Aluminium yachts are catered for with suitable aluminium flanges. These are designed to be welded to the top of a mounting base constructed in the hull.
|
Plastimo Marine Equipment R200 Retract Thruster
(Product ID: 10018)
QuickSpecs
Base Price:
Plastimo Marine Equipment R200 Retract Thruster
Benefiting from a 2005 control system redesign the R200 fits perfectly into the Max Powers product range.
At the very top end of the full production boat, this unit has long been used in the 55’/65’ yachts of prestigious builders.
|
Plastimo Marine Equipment R300 Retract Thruster
(Product ID: 10019)
QuickSpecs
Base Price:
Plastimo Marine Equipment R300 Retract Thruster
Newly redesigned, the R300 now benefits from evolutions already pioneered on the R450 such as the gas spring closing mechanism and silent block door mounts.
Both light & powerful this unit has been consistently specified by designers worldwide for many years.
|
|
|
|
Plastimo Marine Equipment Regatta Buoy-Cylindrical
(Product ID: 9659)
QuickSpecs
Base Price:
Plastimo Marine Equipment Regatta Buoy
Large inflatable mark buoys, manufactured from bright yellow PVC. Totally resistant to UV rays. Fitted with carrying handles and two inflation/deflation valves. Both buoys feature large transparent pocket (s) for advertising use.
Dimensions of pockets : 69 x 60 cm. Fitted with special net that absorbs pulling forces from anchor line. No special ballast required, no special maintenance necessary.
|
|
|
Plastimo Marine Equipment Narrow Transom Ladder
(Product ID: 9621)
QuickSpecs
Base Price:
Plastimo Marine Equipment Narrow Transom Ladder
Unique step-adjusting concept, designed by our Research & Developement department.
This exclusive assembly process allows to keep the steps horizontal, whatever the shape and inclination of the free-board, transom or skirt.
You simply adjust yourself the inclination of the steps with an allen key, which unables you to convert a "series" ladder into a "customised" ladder.
|
|
|
|
Plastimo Marine Equipment Omnidirectional Wind Scoop
(Product ID: 9679)
QuickSpecs
Base Price:
Plastimo Marine Equipment Omnidirectional Wind Scoop
The Plastimo wind scoops are trimmed with a reinforced band over the seams, for increased durability and optimum strain resistance.
They can thus be kept fairly taut and can cope with strong winds.
|
|
|
|
|
|
|
|
|
|
|
|
|
|